SDS6000L Series Firmware Update
バージョン
V2.0.3.5
2026-01-15
バージョンの説明
1. Decode: Added Spacewire, USB2.0, CAN XL
2. Measure:
4. Math:
7. Zoom:
10. Save/Recall:
13. Webserver: supported inverted screenshot (according to the Image style setting in the Save menu) ; Added Run/Stop virtual button
14. SCPI: Added command MANual to support to set Amplitude Strategy of Measure
15. Fixed several bugs
2. Measure:
a) Added item: UpperLower
b) Added Source: ZFx, ZMx
c) Supported zoom in the measure histogram
3. Cursors: Supported to hide Y cursors in track modeb) Added Source: ZFx, ZMx
c) Supported zoom in the measure histogram
4. Math:
a) Supported up to 8 traces
b) Added operators: Envelope, tan, atan, FFT Phase
c) FFT：peak added delta display; marker added ordering by number, amplitude and frequency
d) FFT：Added windows Blackma_Harris and Gaussian
e) Supported to hide traces
5. Analysis：
b) Added operators: Envelope, tan, atan, FFT Phase
c) FFT：peak added delta display; marker added ordering by number, amplitude and frequency
d) FFT：Added windows Blackma_Harris and Gaussian
e) Supported to hide traces
a) SignalScan added decode search
b) Eye Diagram: added Vpp measurement
6. REF: Supported to hide tracesb) Eye Diagram: added Vpp measurement
7. Zoom:
a) ZFx supported to set horizontal scale independly; ZFx, ZMx supported to synchronize the display region with Zx
b) Supported to set Zx’ vertical scale with unified adjustment
8. Roll：
b) Supported to set Zx’ vertical scale with unified adjustment
a) Supported decode in Stop mode
b) Supported Roll + Zoom in fast display mode
9. Prode: Supported CP150, HVD3106A; Supported to set external scaling of SAP2500Db) Supported Roll + Zoom in fast display mode
10. Save/Recall:
a) Autosave supported to save pictures
b) Supported to save all channels’ data to a single file
c) FileManager：Supported to view a picture in full screen mode
11. Display:
b) Supported to save all channels’ data to a single file
c) FileManager：Supported to view a picture in full screen mode
a) Axis label supported to set the vertical label on center and right
b) Supported to change the font size
12. System: Time/date supported NTP; Supported education modeb) Supported to change the font size
13. Webserver: supported inverted screenshot (according to the Image style setting in the Save menu) ; Added Run/Stop virtual button
14. SCPI: Added command MANual to support to set Amplitude Strategy of Measure
15. Fixed several bugs
a) Sending SCPI commands continuously lead the instrument to frozen state
SDS6000L Series Firmware Update
バージョン
V1.0.7.9
2024-07-01
バージョンの説明
Made Option 16LA Standard
SDS6000L Series Firmware Update
バージョン
V1.0.7.8
2024-04-02
バージョンの説明
1. Fixed several bugs
a) Cannot exit from Bode plot in some case
b) Cannot detect active probes correctly when the probes are connected at power-on
c) “Set to 50% level” takes the scope frozen in some case
d) Sample rate is displayed incorrectly after reboot from Fixed Memory Length mode
a) Cannot exit from Bode plot in some case
b) Cannot detect active probes correctly when the probes are connected at power-on
c) “Set to 50% level” takes the scope frozen in some case
d) Sample rate is displayed incorrectly after reboot from Fixed Memory Length mode
SDS6000L Series Firmware Update
バージョン
V1.0.6.3
2023-09-07
バージョンの説明
1. Fixed some serious bugs in Roll and Sequence
2. Optimized external trigger jitter
3. Fixed some freezing bugs
2. Optimized external trigger jitter
3. Fixed some freezing bugs
SDS6000L Series Firmware Update
バージョン
V1.0.5.3
2023-11-09
バージョンの説明
The first release
バージョンの説明
バージョンの説明
