SNA5022A&SNA5032A Firmware Update
バージョン
V1.0.0.2.15
2025-11-18
バージョンの説明
Features and Enhancements:
Bug Fixes:
1. Added Automatic Fixture Removal.
2. Added Noise Figure Measurement.
3. Added Power Meter Viewer Dialog.
4. Added support for cal kits with Sliding Load and Offset Load.
5. Added support for HiSLIP communication protocol.
2. Added Noise Figure Measurement.
3. Added Power Meter Viewer Dialog.
4. Added support for cal kits with Sliding Load and Offset Load.
5. Added support for HiSLIP communication protocol.
Bug Fixes:
1. Fixed a problem when changing IF bandwidth.
2. Fixed issue where changing directory in the File Browser would cause GUI crash.
3. Fixed issue where multi-channel calibration would cause crash.
4. Fixed issue where cal file would not correctly save or recall.
5. Fixed issue where sweep time would not estimate correctly after adding a SA channel
6. Fixed issue with calibration type list display.
7. Fixed a bug where loading S2P file for 2-port de-embedding would cause crash
8.Fixed issue with calibrating with a DATA-BASED calibration kit.
9. Fixed issue with recalling CSV or SNP data files.
2. Fixed issue where changing directory in the File Browser would cause GUI crash.
3. Fixed issue where multi-channel calibration would cause crash.
4. Fixed issue where cal file would not correctly save or recall.
5. Fixed issue where sweep time would not estimate correctly after adding a SA channel
6. Fixed issue with calibration type list display.
7. Fixed a bug where loading S2P file for 2-port de-embedding would cause crash
8.Fixed issue with calibrating with a DATA-BASED calibration kit.
9. Fixed issue with recalling CSV or SNP data files.
SNA5000A Firmware Update
バージョン
V1.0.0.2.15
2025-10-17
バージョンの説明
Features and Enhancements:
1. Added Automatic Fixture Removal.
2. Added Millimeter Wave Measurement.
3. Added Noise Figure Measurement.
4. Added Power Meter Viewer Dialog.
5. Added support for cal kits with Sliding Load and Offset Load.
6. Added support for HiSLIP communication protocol.
Bug Fixes:
1. Fixed a problem when changing IF bandwidth.
2. Fixed issue where changing directory in the File Browser would cause GUI crash.
3. Fixed issue where multi-channel calibration would cause crash.
4. Fixed issue where cal file would not correctly save or recall.
5. Fixed issue where sweep time would not estimate correctly after adding a SA channel
6. Fixed issue with calibration type list display.
7. Fixed a bug where loading S2P file for 2-port de-embedding would cause crash
8.Fixed issue with calibrating with a DATA-BASED calibration kit.
9. Fixed issue with recalling CSV or SNP data files.
1. Added Automatic Fixture Removal.
2. Added Millimeter Wave Measurement.
3. Added Noise Figure Measurement.
4. Added Power Meter Viewer Dialog.
5. Added support for cal kits with Sliding Load and Offset Load.
6. Added support for HiSLIP communication protocol.
Bug Fixes:
1. Fixed a problem when changing IF bandwidth.
2. Fixed issue where changing directory in the File Browser would cause GUI crash.
3. Fixed issue where multi-channel calibration would cause crash.
4. Fixed issue where cal file would not correctly save or recall.
5. Fixed issue where sweep time would not estimate correctly after adding a SA channel
6. Fixed issue with calibration type list display.
7. Fixed a bug where loading S2P file for 2-port de-embedding would cause crash
8.Fixed issue with calibrating with a DATA-BASED calibration kit.
9. Fixed issue with recalling CSV or SNP data files.
SNA5022A&SNA5032A Firmware Update
バージョン
V1.0.0.2.13
2025-01-15
バージョンの説明
1. Add gain compression measurement and vector mixing measurement function
SNA5000A Firmware Update
バージョン
V1.0.0.2.13
2024-12-06
バージョンの説明
1.Add Gain Compression Option
2.Add vector mixing option
3.Optimize the scanning speed of segment scanning
4.Adjust and optimize the function of saving and recalling SNA and CSV files.
5.Adjust and optimize the network storage function, and add support for Samba service.
2.Add vector mixing option
3.Optimize the scanning speed of segment scanning
4.Adjust and optimize the function of saving and recalling SNA and CSV files.
5.Adjust and optimize the network storage function, and add support for Samba service.
SNA5022A&SNA5032A Firmware Update
バージョン
V1.0.0.2.12
2024-07-19
バージョンの説明
1. Add material measurement function option
2. Add switch matrix expansion multi-port application options
2. Add switch matrix expansion multi-port application options
SNA5000A Firmware Update
バージョン
V1.0.0.2.12
2024-07-19
バージョンの説明
1. Add material measurement function option
2. Add switch matrix expansion multi-port application options
2. Add switch matrix expansion multi-port application options
SNA5000A Firmware Update
バージョン
V1.0.0.2.11.R6
2023-12-11
バージョンの説明
1. add manual configuration of DC under TDR
2. overwrite function added to calibration
3. optimize synchronization of extemal triggers for pulse measurements
2. overwrite function added to calibration
3. optimize synchronization of extemal triggers for pulse measurements
SNA5022A&SNA5032A Firmware Update
バージョン
V1.0.0.2.11.R6
2023-11-29
バージョンの説明
1.Add manual configuration of DC under TDR
2.Add calibration overwrite function
3.Optimize synchronization of external triggers for pulse measurements
2.Add calibration overwrite function
3.Optimize synchronization of external triggers for pulse measurements
SNA5022A&SNA5032A Firmware Update
バージョン
V1.0.0.2.11
2023-11-10
バージョンの説明
Added Pulse modulation function
SNA5000A Firmware Update
バージョン
V1.0.0.2.11
2023-11-10
バージョンの説明
Added Pulse modulation function
SNA5022A&SNA5032A Firmware Update
バージョン
V1.0.0.2.10R10
2023-11-10
バージョンの説明
1. Added user manual calibration and verification function (option)
2. Added the function that the number of vertical grid can be set
3. Added the function of supporting logarithmic display of vertical coordinates
4. Added point limit function
2. Added the function that the number of vertical grid can be set
3. Added the function of supporting logarithmic display of vertical coordinates
4. Added point limit function
SNA5000 Firmware Update
バージョン
V1.0.0.2.10R10
2023-11-10
バージョンの説明
1. Added user manual calibration and verification function
(option)
2. Added the function that the number of vertical grid can be set
3. Added the function of supporting logarithmic display of vertical coordinates
4. Added point limit function
(option)
2. Added the function that the number of vertical grid can be set
3. Added the function of supporting logarithmic display of vertical coordinates
4. Added point limit function
SNA5000 Firmware Update
バージョン
V1.0.0.2.10R9
2023-11-10
バージョンの説明
1. Added scalar mixer measurement function
2. Adjusted and optimized the spectrum analysis measure interface
2. Adjusted and optimized the spectrum analysis measure interface
SNA5000 Firmware Update
バージョン
V1.0.0.2.10.R8
2023-11-10
バージョンの説明
1. Added Freq Offset function
2. Optimized some functions of spectrum analysis
3. Added status bar to display smooth status
4. Added advanced mode for bandwidth search, support frequency percentage bandwidth setting function
5. Optimized the Marker->Delay algorithm
2. Optimized some functions of spectrum analysis
3. Added status bar to display smooth status
4. Added advanced mode for bandwidth search, support frequency percentage bandwidth setting function
5. Optimized the Marker->Delay algorithm
SNA5000 Firmware Update
バージョン
V1.0.0.2.10.R5
2023-11-10
バージョンの説明
1. Added independent configuration function of emission source in spectrum mode
2. Optimized the sweep process
3. Optimized TDR interface
4. Added command for transferring file data
5. Added marker->SA commands
2. Optimized the sweep process
3. Optimized TDR interface
4. Added command for transferring file data
5. Added marker->SA commands
SNA5000 Firmware Update
バージョン
V1.0.0.2.10
2023-11-10
バージョンの説明
1. Added spectrum analyzer option
2. Fixed input bug in network configuration window
3. Fixed mouse click input box crash bug
4. Increased the touch-sensitive area of the DHCP checkbox
5. Modified the policy when the DHCP request fails
2. Fixed input bug in network configuration window
3. Fixed mouse click input box crash bug
4. Increased the touch-sensitive area of the DHCP checkbox
5. Modified the policy when the DHCP request fails
SNA5000A Firmware Update
バージョン
V1.0.0.2.9.R5
2023-11-10
バージョンの説明
1.Solved the menu button is not updated when the electronic calibration module is inserted or removed
2. Fixed a bug that the touch screen may crash under some cases
3. Fixed an option installation bug
2. Fixed a bug that the touch screen may crash under some cases
3. Fixed an option installation bug
SNA5000A Firmware Update
バージョン
V1.0.0.2.8
2023-11-10
バージョンの説明
1. Add shortcut buttons at the toolbar
2. Fix the stuttering problem when adjusting the brightness of the grid in the waveform area
3. Solve the problem of probabilistic crashes when opening dialogs
4. File storage shortcut keys support more types
5. Support more power meters
6. Add picture editing function to the screenshot dialog
7. Adds peak reference function for bandwidth search
8. Modify the contents of the Chinese and English help files
9. Modify the user receiver calibration process
10. The input box will pop up automatically when using the toolbar button to add Marker
2. Fix the stuttering problem when adjusting the brightness of the grid in the waveform area
3. Solve the problem of probabilistic crashes when opening dialogs
4. File storage shortcut keys support more types
5. Support more power meters
6. Add picture editing function to the screenshot dialog
7. Adds peak reference function for bandwidth search
8. Modify the contents of the Chinese and English help files
9. Modify the user receiver calibration process
10. The input box will pop up automatically when using the toolbar button to add Marker
SNA5022A&SNA5032A Firmware Update
バージョン
V1.0.0.2.11.R1
2023-09-22
バージョンの説明
1. Fixed the range limits for frequency and power in mixer measurements
2. Fixed the trace title bar color to match the memory trace color
2. Fixed the trace title bar color to match the memory trace color
SNA5000A Firmware Update
バージョン
V1.0.0.2.11.R1
2023-09-19
バージョンの説明
1. Fixed the range limits for frequency and power in mixer measurements.
2. Fixed the trace title bar color to match the memory trace color.
2. Fixed the trace title bar color to match the memory trace color.
バージョンの説明
バージョンの説明
